Description
Solar Road Studs: Enhancing Road Safety and Efficiency
Product Overview: Solar Road Studs, commonly referred to as cat eyes, play a crucial role in enhancing road safety by reducing accidents at key locations such as regional rail crossings and intersections. They provide essential guidance and hazard warnings to drivers during low light conditions and adverse weather. Utilizing a solar energy system, these devices help in reducing environmental impacts and operational costs. With over 15 years of manufacturing experience, our solar-powered cat eyes are competitively priced and designed to meet the diverse needs of the global traffic road safety market.
Key Features:
- Environmental Sustainability: Operates entirely on solar power, significantly reducing pollution and dependency on non-renewable energy resources.
- Cost Efficiency: No ongoing electricity costs and minimal maintenance requirements make these road studs a cost-effective solution for traffic management.
- Easy Installation: Designed for quick and straightforward installation with a simple epoxy glue method.
- Automatic Functionality: Features a brightness-sensitive auto-switch that automatically activates the LEDs at night and turns them off at dawn.
- Longevity and Durability: Built to withstand various weather conditions and provide reliable performance for years.
Working Principle: Solar road studs operate by absorbing sunlight through solar panels during the day. This solar energy is converted into electrical energy, stored in batteries or capacitors. At night or under poor weather conditions, this stored energy is automatically converted into light by LEDs. The bright, flashing light effectively outlines roads and captures drivers’ attention sooner than traditional road studs.
Installation Method:
- Location and Preparation: Identify the installation spots and measure the distance. Ensure the road surface is clean and flat.
- Apply Adhesive: Thoroughly clean the bottom of each stud and apply epoxy glue evenly.
- Installation: Place the stud on the prepared spot, press firmly, and ensure it’s correctly aligned.
- Inspection: Check the installation after two hours to ensure all studs are correctly placed and fully functional.
- Completion: Allow the adhesive to cure for 6-8 hours, then remove any barriers used during installation.
Recommended Spacing:
- Highways and Expressways: 5-6 meters (approx. 7-8 yards)
- Dangerous Entrances and Exits: 2-3 meters (approx. 4-5 yards)
- Hospital and Parking Lot Access Points: 0.5-2 meters (approx. 0.5-3 yards)
Usage Considerations: The spacing of solar road studs can be adjusted based on specific site requirements and traffic conditions to maximize visibility and effectiveness.
Specification :
| Material | Aluminum+PC |
| Power supply | Mono crystalline solar panel |
| 2.5V/120MA for NI-MH; | |
| Battery | NI-MH 1.2V/ 600mah(high temperature resistance); |
| Lens | PC |
| LED | Ultra bright diameter 5mm(6pcs) |
| LED color | Red,Yellow,Green,Blue,White |
| Working model | Blinking or constant(charged at daytime, working automatically at night) |
| Working hours | (1).Blinking:140hours for NI-MH battery; 130hours for lithium battery; |
| (2).Constant:40hours for NI-MH battery; 35hours for lithium battery; | |
| Visual distance | >800m |
| Water proof | IP68 |
| Resistance | >20T |
| Life span | 2years for NI-MH battery; |
| 5years for Lithium battery; | |
| Size | 124*43*29mm (L4.88″*W1.69″*H1.14″) |
| Packing | 2pc/box;60pcs/ctn |
| Carton size | 48*27*21.5cm (18.90″*10.63″*8.46″) |
| Weight | 26kgs/ctn (57.32bs/ctn) |
| Certificate | CE;ROHS;IP68 |
Reviews
There are no reviews yet.