Description
Key Features and Advantages
- Eco-Friendly and Cost-Effective: Leveraging solar energy significantly reduces environmental impact and operational costs associated with traditional road lighting.
- Longevity: Solar road studs have a robust design, with a super capacity power source that can last more than 10 years.
- Automatic Operation: Equipped with photoelectric switches, these studs automatically recharge during daylight hours and activate at dusk or in poor weather conditions.
- High Visibility: The bright LEDs are much more effective in attracting drivers’ attention compared to standard road studs, enhancing road safety significantly.
- Versatile Application: Ideal for a variety of locations including highways, expressways, dangerous entrances/exits, and access ways to hospitals and parking lots.
- Customization: OEM/ODM services are available, allowing for customization to meet specific requirements of different road safety projects.
Installation Method for Raised LED Road Marker
- Preparation: Determine the precise installation locations and ensure the road surface is clean and flat. This helps in achieving optimal adhesion and effectiveness of the road studs.
- Application of Adhesive: Clean the bottom surface of the solar road stud and apply epoxy glue evenly.
- Installation: Firmly press the stud onto the road surface with the adhesive side down. Position it correctly to ensure visibility and effectiveness.
- Quality Check: Within the first 2 hours of installation, inspect the installation to ensure all studs are correctly aligned and securely fixed without any deformation.
- Finalization: Allow the adhesive to cure and set completely, typically within 6-8 hours, before removing any installation barriers.
Recommended Spacing
- Highways and Expressways: 5 – 6 meters (approximately 7 – 8 yards)
- Dangerous Entrances and Exits: 2 – 3 meters (approximately 4 – 5 yards)
- Access or Exit Ways for Hospitals, Parking Lots, etc.: 0.5 – 2 meters (approximately 0.5 – 3 yards)
Note: These spacing recommendations can be adjusted based on specific site conditions and requirements.
Long-Term Benefits
Solar road studs are designed to withstand over three years of use under normal conditions, and their operational period extends significantly after a full recharge—up to 180 hours in flashing mode and 40 hours in steady mode during foggy or rainy days. This longevity and reliability make solar road studs a preferred choice for sustainable road safety solutions, contributing to fewer road accidents and enhanced night-time navigation.
Specification :
| Body material | PC |
| Power supply | Solar panel(mono crystalline 2.5V/0.2W) |
| Battery | NI-MH1.2V/800MAH or Lithum battery |
| LED | Ultra bright diameter 5mm( 6pcs or 10pcs) |
| LED color | Red, Yellow, Green, Blue, White |
| working mode | Recharging at day and working automatically at night |
| Flashing mode | Blinking or constant(flashing frequency 2Hz, also can be made according to your requirements) |
| Working hours | (1).Blinking:140hours for NI-MH battery; 130hours for lithum battery; (2).Constant:40hours for NI-MH battery; 35hours for lithum batter |
| Water proof | IP68 |
| Visual distance | >800m |
| Life span | >3years |
| Load capacity | >20T |
| Size | φ122*25mm (φ4.80″*0.98″) |
| Working temperature | -40~85 °C |
| Life span | 2years for NI-MH battery; 5years for Lithum battery |
Reviews
There are no reviews yet.